找回密码
 注册
搜索
查看: 4439|回复: 7

NGC孪蛇欧版镜象网盘下载+模拟器+问题解答

[复制链接]
发表于 2009-3-28 12:13:52 | 显示全部楼层 |阅读模式
由于本人网速较慢,所以就不七传附件了,给出连接大家自己下吧,网站需要注册

孪蛇镜象:http://bbs.emu-zone.org/newbbs/thread-591133-1-1.html
模拟器:http://bbs.emu-zone.org/newbbs/thread-592260-1-1.html

不能打开网盘的请到这里下载VPN代理软件并安装:http://www.uushare.com/user/juaner/file/1391154

常见问题:
1.Can&#39t create opengl renderer

Uninstall Drivers in Safe mode. Reboot.
Reinstall Drivers in safe mode. Reboot to normal mode.
that&#39ll default the opengl sub system.
------------------------------------------------------------------------------
2.failed to grab 1 GB of contiguous memory

If you&#39re plagued by this error message, and get this any time that you try to start any game on the new dolphin versions- then just try the following to fix it.
Edit: These fixes don&#39t fix the problem if it&#39s caused by kaspersky, it only fixes it for any other reason that might be causing it- specifically when you can&#39t figure out why you&#39re even getting the error message. Though these can help if you don&#39t have kaspersky installed, or you may need to do these anyway.
: Fix 1 :
Part 1: Right click on the &#39dolphinwx&#39 exe program in the dolphin folder, and click on &#39Properties&#39.
Part 2: Click on the &#39Compatibility&#39 tab in the newly opened Properties window, and then check the &#39Turn off advanced text services for this program&#39 box if it isn&#39t already- which is located under &#39Input settings&#39 and then press &#39OK&#39.
Note: Restart the program after you set this value and have pressed ok on the properties window for it to take effect, everytime that you move the exe or rename it you&#39ll have to set this value again.
: End Fix 1 :
If this didn&#39t fix your problem, then try this next fix (this will also help if you ever get low on ram).
: Fix 2 :
Part 1: Right click on &#39My Computer&#39 on the Desktop, and click on &#39Properties&#39. This can also be accessed from the &#39System&#39 icon in Control Panel, and various other ways.
Note: To get the &#39My Computer&#39 icon on your desktop, right click on a free area on the desktop and click on &#39Properties&#39- then click on the &#39Desktop&#39 tab- click on the &#39Customize Desktop&#39 button- then check the &#39My Computer&#39 desktop item box. After that just click OK on all of the windows that it opened, and you should have the icon on your desktop for it then.
Part 2: Click on the &#39Advanced&#39 tab in the newly opened &#39System Properties&#39 window, and then click on the &#39Settings&#39 button under &#39Performance&#39.
Part 3: Click on the &#39Advanced&#39 tab in the newly opened &#39Performance Options&#39 window, and click on the &#39Change&#39 button under &#39Virtual Memory&#39.
Part 4: Here in the newly opened &#39Virtual Memory&#39 window, select the drives that you have the iso/gcm file on- and also selecting and doing the following for the drive that you run the Dolphin program on won&#39t hurt. Start by selecting the &#39Custom Size&#39 circle, and enter in atleast 1534 (MB) for the &#39Initial Size&#39 field, and atleast 3048 (MB) for the Maximum Size field. After you&#39ve done that for all of the drives that dolphin or the iso/gcm files are on, press &#39OK&#39 on all of the windows that were opened. Then it will prompt you to restart your PC, you need to restart your PC for these changes to take effect. So do that and then try running dolphin after the restart, this and Fix 1 should solve the error message whenever you try to run a game after newly opening dolphin.
: End Fix 2 :

By doing both of these fixes it should solve the problem, you may only need to do 1 of these fixes. I was getting that error every time that I tried to run the new dolphin, so I found a simple way around it- and made this guide to help anyone else that also gets the error.
-----------------------------------------------------------------------------------
3.Write to invalid memory region (0x7e000000)


Quote:
Originally Posted by xcedf
Just write TLBHack = 1 after [Core] in patch file for the game you
think suffers with TLB crash, and maybe it become bootable or
playable
What is the patch file?
__________________

Quote:
Originally Posted by Why-Fi
What is the patch file?
You must know yourself, if you think this game suffers with TLB click the
right mouse button on it, then go Properties and Edit Config it will edit
or create patch *if it doesn&#39t exist*
__________________


Here it&#39s mine..
# GFZP01 - F-ZERO GX
[Core]
TLBHack = 1
[EmuState]
#The Emulation State.
EmulationStateId = 1
[OnFrame]
[ActionReplay]
Also, the first time i opened this file, there wasn&#39t a \"CORE\" line, so i
went ahead and created mine... but it still doesn&#39t works.
发表于 2009-3-28 15:36:06 | 显示全部楼层
感谢楼主,虽然用不七,但还是支持一下。

目前网七只有欧版的镜像,美版和日版的都很少见到啃。
发表于 2009-5-4 17:35:42 | 显示全部楼层
LZ成功模拟了么?
 楼主| 发表于 2009-5-6 12:28:41 | 显示全部楼层
[quote=yy.008;534089]LZ成功模拟了么?[/quote]
成功模拟了,不过机器比较烂,没法玩
发表于 2009-5-6 14:32:16 | 显示全部楼层
什么配置才行?NGC模拟器支持跳帧不?
发表于 2009-5-6 16:33:36 | 显示全部楼层
不支持跳帧,最小内存1G,双核CPU,DX9以七吧
发表于 2009-5-6 16:40:56 | 显示全部楼层
cpu是关键
发表于 2009-5-6 17:38:33 | 显示全部楼层
感谢楼主,虽然用不七,但还是支持一下。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|MGCN谍海游龙

GMT+8, 2026-8-15 16:15 , Processed in 0.043846 second(s), 18 queries .

Powered by Discuz! X5.0

© 2001-2026 Discuz! Team.

快速回复 返回顶部 返回列表